模板:How to use iODD

来自iODD
Kbs讨论 | 贡献2016年6月3日 (五) 17:00的版本

跳转至: 导航搜索

基本职能

IODD的示例文件夹树

创建一个在根文件夹命名的文件夹 "_ISO"
此文件夹树就是一个例子
"_ISO"下的任何文件名和文件夹名是可以接受的
J:
├─ _ISO
│  │  Hiren’s BootCD 15.2.iso
│  │  ubuntu-14.04.4-desktop-amd64.iso
│  │  Windows 10.iso
│  │  Windows XP sp3.iso
│  │  (32文件夹及文件夹中限制)
│  │  
│  ├─IMA for Floppy
│  │      Bios updater.ima
│  │      MS-DOS 6.0.ima
│  │      Symantec Ghost.ima
│  │      
│  ├─RMD for Setup
│  │      Win 7Ent_x86_x64+8.1Pro+10Pro vol2.RMD
│  │      Win7_Ult_SP1_Russian_x64.RMD
│  │      Windows 10.RMD
│  │      
│  └─VHD for Booting
│      │  linuxmint-17.3-cinnamon-32bit.vhd
│      │  Windows 10 Win2Go.vhd
│      │  Windows 7 OS Booting.vhd
│      │  
│      └─嵌套子文件夹允许
├─Your Folder 01
├─Your Folder 02
├─Your Folder 99
│  Your files 01.txt
│  Your files 02.txt
│  Your files 99.txt

2531 钥匙

  1. 导航
    • 向上/向下名单 - 向上/向下拨轮
    • 选择文件 - 推拨轮
    • 转到向上的文件夹 - 按BackUp按钮
  2. 菜单
    • 要进入菜单 - 推拨轮
    • 要退出 - 按BackUp按钮
  3. 长键(按3秒)
    • 抬起拨轮 - 刷新文件列表
    • 向下拨轮 - 进入节能状态
    • 拨轮 - 进入到菜单
    • 按下BackUp按钮 - 重启。和分离所有虚拟机(VHD,RMD,IMA)
  4. 启动密钥(启动时)
    • 抬起拨轮 - 在CD-模式启动
    • 向下拨轮 - 在HDD模式启动了
    • 拨轮 - 复位加载状态。双模式启动
    • 按下备份按钮 - 在写保护模式启动。

2541 钥匙

  1. 导航
    • 向上/向下列表 - 2 / 8
    • 选择文件 - 5 (or 6, 用于保持装载状态)
  2. 菜单
    • Menu -进入菜单。 (或出口)
    • 4 - 转到上名单
  3. 长键(按3秒)
    • 1 - 进入节能状态
    • 3 - 重新启动IODD
    • 4 - 刷新文件列表
    • 7 - 重启。和分离所有虚拟机(VHD,RMD,IMA)
    • 0 - 重新启动。并暂时禁用写保护
  4. 没有启动密钥

进入节能状态

省电状态:主轴电机停止,液晶显示器的亮度是低的。
CD装载状态被保存
  • (2531) 下滚轮按钮3秒钟
  • (2541) 按1键3秒

选择一个文件

为了保持加载状态,你必须保存的状态。
参考以上的键操作。
  • (2531) #2531 钥匙
    • 如果固件版本为1558或更高,载荷状态会自动保存。
    • 如果没有,你必须手动保存. (#进入省电状态)
  • (2541) #2541 钥匙
    • 如果固件版本低于6(7)9-05,按键6起不了什么作用

安全去除

如果IODD的分区是NTFS,然后从主机断开IODD时,此功能是必需的。
NTFS不会立即将数据写入硬盘。
  • 断开连接之前请不要 拆除安全
  • 如果IODD是写保护模式,并显示一条错误消息,然后禁用写保护选项。然后重试此功能。

初始化

  • 固件两类。一个是NTFS版本和其他是FAT32/ exFAT的版本。
  • NTFS固件版本出货
  • 如果使用FAT32exFAT的分区,然后运行FAT固件更新。
  • 按照以下步骤
  1. 组装HDD或SSD与IODD
  2. 该IODD连接到PC
  3. 初始化MBR驱动器
  4. 格式化第一个分区为NTFS。 (如果固件是FAT,然后格式化为FAT32或exFAT的)
    • 在FAT32分区有4G字节的文件大小限制。请谨慎使用
  5. 创建根文件夹"_ISO"文件夹。 (不区分大小写)
  6. 复制ISO文件“_ISO”文件夹中。 (或创建VHD RMD IMA文件)
  7. 安全地删除 iODD. (非常重要,如果NTFS)
  8. 如果省电模式被激活,然后断开并重新连接USB电缆。
    • 如果没有,那么 转到节能状态
    • 如果“Plug Out ..”出现,然后断开并重新连接USB电缆。
  9. 在下面将依次出现在LCD
    • "iodd 253(4)1"
    • 一个文件名

初始化所有

如果初始化失败,请按照下面的步骤
  1. 断开USB连接线
  2. 走出从IODD硬盘。并直接将它连接到PC。
  3. 初始化为 'GPT'
  4. 重做初始化(从第一工序)。 (你的硬盘初始化为MBR - > GPT - > MBR)。

急救

如果有突然出现故障,请尝试下一步骤之一,直到错误清晰
  1. 2531)按滚轮按钮不放,并IODD连接到PC。
  2. 尝试安全去除操作系统
  3. 检查磁盘的IODD( 适用于Windows
  4. 重命名“_ISO”文件夹名称以其他名称。创建新"_ISO"文件夹,文件复制到该文件夹。 (没有移动)
  5. 最新的固件更新。
  6. IODD的备份数据。和所有的初始化
如果有硬件问题
  1. 重新启动电脑
  2. 请更改USB电缆
  3. 连接到IODD PC背面板的端口。
  4. 尝试在另一台PC
  5. 请更换硬盘。

使用虚拟USB光驱(DVD-ROM或蓝光ROM)

  1. 复制ISO文件,以“_ISO”文件夹中。 (或子文件夹)
  2. 安全删除. (要求NTFS
  3. 如果省电模式 ,则进入节能状态
    • 如果出现“Plug Out ...”消息,断开IODD。
  4. IODD连接到PC。和PC上的力量。
  5. 可选)使IODD或USB CD-ROM在BIOS启动顺序的首要任务。
  6. 如果文件未被选择,然后选择一个ISO文件。选择一个文件
  7. 如果电脑没有找到启动设备(IODD),然后重新启动电脑。(CTRL-ALT-DEL)

Booting Error

  • Confirm whether the ISO file is able to boot.
  • If your PC is old or does not provide multi LUN, please select CD-MODE (or ODD-MODE).
  • In order to confirm whether the ISO file is able to boot, please try to test it with the validated PC.
  • Although it is bootable ISO file, please confirm whether the result with a USB DVD-ROM is the same
  • If the ISO file is able to boot with USB DVD-ROM and can not boot with iODD, then please use USB Y-CABLE for adding external power.
  • If your laptop has own internal DVD-ROM and iODD does not boot, please disable internal DVD-ROM at BIOS settings. or remove it.

Using a Virtual USB fixed disk drive (Virtual Hard Disk)

  • Fixed VHD file only is supported. (dynamic VHD and VHDx files are not supported)
  • Also fixed VMDK file is supported.
  • Create VHD files directly by "VHD Tool++". ("VHD Tool++" can creates a file without fragment)
  • You can make VMDK by changing name *.VHD to *.VMDK
  • If you select a VHD file (Selecting a file),iODD will be rebooted with CD-MODE and is recognized as USB disk drive.
  • If you want to change to DUAL-MODE or to change Write Protection option, rename the VHD file. refer to "VHD Tool++"
  • Max 4 Virtual Drives are supported at the same time ( Successive selection within 3 seconds)
  1. Create a VHD file using "VHD Tool++" in iODD
  2. If successful, Do safely remove the iODD in OS. ( Very Important to NTFS)
  3. If Power Saving mode is not active, then Go to Power Saving State
    • If Plug Out ... message appear, disconnect the iODD.
  4. Connect iODD to your PC. and power on the PC.
  5. (Optional) Make iODD or USB Device as the first priority of BOOT sequence in BIOS.
  6. If a file has not been selected, then select a VHD file. (Selecting a file)
  7. If PC don't find booting device (iODD), then reboot the PC. (Ctrl-Alt-Del)

Using a Virtual USB Removable Flash Drive (Virtual USB Flash Drive)

  • Almost the same as the above method (Using a Virtual USB fixed disk drive)
  • But the file extension must be changed. VHD -> RMD

Using a Virtual USB Floppy Drive (Virtual FDD)

  • This method is not supported on some computers.
  • Uncompressed floppy image IMA, IMG, BIF, VFD is supported.
  • IMG, BIF, VFD image file extension must be renamed to IMA.
  • Almost the same as the above method