查看“模板:How to use iODD”的源代码

=== 基本职能 ===
==== IODD的示例文件夹树 ====
:创建一个在根文件夹命名的文件夹 "_ISO"
:此文件夹树就是一个例子
:"_ISO"下的任何文件名和文件夹名是可以接受的

 <code>'''J:'''</code>
 ├─ <code>'''_ISO'''</code>
 │  │  Hiren’s BootCD 15.2.iso
 │  │  ubuntu-14.04.4-desktop-amd64.iso
 │  │  Windows 10.iso
 │  │  Windows XP sp3.iso
 │  │  '''(32文件夹及文件夹中限制)'''
 │  │  
 │  ├─<code>IMA for Floppy</code>
 │  │      Bios updater.ima
 │  │      MS-DOS 6.0.ima
 │  │      Symantec Ghost.ima
 │  │      
 │  ├─<code>RMD for Setup</code>
 │  │      Win 7Ent_x86_x64+8.1Pro+10Pro vol2.RMD
 │  │      Win7_Ult_SP1_Russian_x64.RMD
 │  │      Windows 10.RMD
 │  │      
 │  └─<code>VHD for Booting</code>
 │      │  linuxmint-17.3-cinnamon-32bit.vhd
 │      │  Windows 10 Win2Go.vhd
 │      │  Windows 7 OS Booting.vhd
 │      │  
 │      └─<code>'''嵌套子文件夹允许'''</code>
 ├─<code>Your Folder 01</code>
 ├─<code>Your Folder 02</code>
 ├─<code>Your Folder 99</code>
 │  Your files 01.txt
 │  Your files 02.txt
 │  Your files 99.txt

==== 2531 钥匙 ====
# 导航 
#* 向上/向下名单 - 向上/向下<code>拨轮</code>
#* 选择文件 - 推<code>拨轮</code>
#* 转到向上的文件夹 - 按<code>BackUp</code>按钮
# 菜单
#* 要进入菜单 - 推<code>拨轮</code> 
#* 要退出 - 按<code>BackUp</code>按钮
# 长键（按3秒）
#* 抬起<code>拨轮</code> - 刷新文件列表
#* 向下<code>拨轮</code> - [[#进入节能状态 | 进入节能状态]]
#* 按<code>拨轮</code> - 进入到菜单
#* 按下<code>BackUp</code>按钮 - 重启。和分离所有虚拟机（VHD，RMD，IMA）
# 启动密钥（启动时）
#* 抬起<code>拨轮</code> - 在CD-模式启动
#* 向下<code>拨轮</code> - 在HDD模式启动了
#* 按<code>拨轮</code> - 复位加载状态。双模式启动
#* 按下<code>备份</code>按钮 - 在写保护模式启动。

==== 2541 钥匙 ====
# 导航
#* 向上/向下列表 - <code>2</code> / <code>8</code>
#* 选择文件  - <code>5</code> (or <code>6</code>, 用于保持装载状态) 
# 菜单
#* <code>Menu</code> -进入菜单。 （或出口）
#* <code>4</code> - 转到上名单
# 长键（按3秒）
#* <code>1</code> - [[#进入节能状态|进入节能状态]]
#* <code>3</code> - 重新启动IODD
#* <code>4</code> - 刷新文件列表
#* <code>7</code> - 重启。和分离所有虚拟机（VHD，RMD，IMA）
#* <code>0</code> - 重新启动。并暂时禁用写保护
# 没有启动密钥

==== 进入节能状态 ====
: 省电状态：主轴电机停止，液晶显示器的亮度是低的。
: CD装载状态被保存
* (2531) 下<code>滚轮按钮</code>3秒钟
* (2541) 按<code>1</code>键3秒

==== 选择一个文件 ====
: 为了保持加载状态，你必须保存的状态。
: 参考以上的键操作。
* (2531) [[#2531 钥匙]]
** 如果固件版本为1558或更高，载荷状态会自动保存。
** 如果没有，你必须手动保存. ([[#进入省电状态]])
* (2541) [[#2541 钥匙]]
** 如果固件版本低于6（7）9-05，按键6起不了什么作用

==== 安全去除OS ====
: 如果IODD的分区是NTFS，然后从主机断开IODD时，此功能是必需的。
: NTFS不会立即将数据写入硬盘。
* 断开连接之前请不要 [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer 拆除安全]
* 如果IODD是写保护模式，并显示一条错误消息，然后禁用写保护选项。然后重试此功能。

=== Initialization ===
* the firmware is two sorts. one is NTFS version and other is FAT32/exFAT version.
* NTFS firmware version is shipped.
* If you use [[msen:FAT32|FAT32]] or [[wken:exFAT|exFAT]] [[msen:Partition|Partition]], then run FAT Firmware Updater.
* follow the next steps
# assemble the HDD or SSD with iODD
# connect the iODD to PC
# initialize the drive with [[wken:MBR|MBR]]
# Format the first partition as NTFS. (if the firmware is FAT, then format it as FAT32 or exFAT)
#* At FAT32 there is 4G byte file size limitation. please use that carefully.
# create ''_ISO'' folder in root folder. (not case sensitive)
# copy ISO file to "_ISO" folder. (or create VHD RMD IMA files)
# [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer safely remove] iODD. ( very '''Important''' if NTFS)
# If Power Saving mode is active, then disconnect and reconnect the USB cable.
#* If not, then [[#Go to Power Saving State|Go to Power Saving State]]
#* if ''"Plug Out ..."'' appears , disconnect and reconnect the USB cable.
# The followings  will appear sequentially in LCD
#* "''iodd 253(4)1''"
#* a file name

==== Initialize All ====
:If [[#Initialization|Initialization]] fails, follow the next steps
# disconnect the USB cable.
# Get out the HDD from iODD. and Connect directly it to PC.
# Initialize it as '[[msen:GPT|GPT]]'.
# redo [[#Initialization|Initialization]] (from the first step).  (your HDD is initialized as ''MBR -> GPT -> MBR'').

=== First Aid ===
: If it has failure suddenly, try one of next steps until the error is clear
# (2531) press the Jog Dial and hold, and connect iODD to PC.
# try [[#Safely Removal In OS|Safely Removal In OS]].
# Check Disk for iODD ([[msen:check%20disk | for Windows]])
# Rename "_ISO" folder name to other name. Create new ''_ISO'' folder, and copy files to this folder. (not moving)
# Update with the latest firmware.
# Backup the data of iODD, and [[#Initialize All|Initialize All]]
: If there is hardware problem 
# Reboot the PC
# Please change USB cable
# Connect iODD to the port of PC back panel.
# Try it on another pc
# Please change HDD.

=== Using a Virtual USB Optical Drive (DVD-ROM or Blu-ray ROM) ===
# copy ISO files to "''_ISO''" folder. (or sub folder)
# [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer Safely Remove]. (Required for NTFS )
# If Power Saving mode is not active , then [[#Go to Power Saving State|Go to Power Saving State]]
#* If "''Plug Out ...''" message appears, disconnect the iODD.
# Connect iODD to a PC. and power on the PC.
# (Optional) Make iODD or USB CD-ROM  as the first priority of BOOT sequence in BIOS.
# If a file has not been selected, then select a ISO file. [[#Selecting a file|Selecting a file]]
# If PC don't find booting device (iODD), then reboot the PC. (Ctrl-Alt-Del)

==== Booting Error ====
* Confirm whether the ISO file is able to boot.
* If your PC is old or does not provide multi LUN, please select ''CD-MODE'' (or ''ODD-MODE'').
* In order to confirm whether the ISO file is able to boot, please try to test it with the validated PC.
* Although it is bootable ISO file, please confirm whether the result with a USB DVD-ROM is the same
* If the ISO file is able to boot with USB DVD-ROM and can not boot with iODD, then please use USB Y-CABLE for adding external power.
* If your laptop has own internal DVD-ROM and iODD does not boot, please disable internal DVD-ROM at BIOS settings. or remove it.

=== Using a Virtual USB fixed disk drive (Virtual Hard Disk) ===
* Fixed VHD file only is supported. (dynamic VHD and VHDx files are not supported)
* Also fixed [[wken:VMDK|VMDK]] file is supported.
* Create VHD files directly by [[VHD Tool++|"VHD Tool++"]]. ("VHD Tool++" can creates a file without fragment)
* You can make VMDK by changing name *.VHD to *.VMDK
* If you select a VHD file ([[#Selecting a file|Selecting a file]]),iODD will be rebooted with ''CD-MODE'' and is recognized as USB disk drive. 
* If you want to change to ''DUAL-MODE'' or to change Write Protection option, rename the VHD file. refer to [[VHD Tool++|"VHD Tool++"]]
* Max 4 Virtual Drives are supported at the same time ( Successive selection within 3 seconds)
# Create a VHD file using [[VHD Tool++|"VHD Tool++"]] in iODD
# If successful, Do [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer safely remove] the iODD in OS. ( Very Important to NTFS)
# If Power Saving mode is not active, then [[#Go to Power Saving State|Go to Power Saving State]]
#* If ''Plug Out ...'' message appear, disconnect the iODD.
# Connect iODD to your PC. and power on the PC.
# (Optional) Make iODD or USB Device  as the first priority of BOOT sequence in BIOS.
# If a file has not been selected, then select a VHD file. ([[#Selecting a file|Selecting a file]])
# If PC don't find booting device (iODD), then reboot the PC. (Ctrl-Alt-Del)

=== Using a Virtual USB Removable Flash Drive (Virtual USB Flash Drive) ===
* Almost the same as the above method (Using a Virtual USB fixed disk drive)
* But the file extension must be changed. ''VHD'' -> ''RMD''

=== Using a Virtual USB Floppy Drive (Virtual FDD) ===
* This method is not supported on some computers.
* Uncompressed floppy image IMA, IMG, BIF, VFD is supported.
* IMG, BIF, VFD image file extension must be renamed to IMA.
* Almost the same as the above method